W14×233 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×233 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 16 in (406.4 mm) deep with a 15.9 in (403.9 mm) flange, a 1.07 in (27.2 mm) web and a 1.72 in (43.7 mm) flange, and weighs 233 lb/ft (346.7 kg/m). Area 68.5 in² (44,193 mm²); strong-axis Ix = 3,010 in⁴ (125,285.7 cm⁴), Sx = 375 in³ (6,145.1 cm³), Zx = 436 in³ (7,144.8 cm³).

dDepth
406.4 mm16 in16 in406.4 mm
bfFlange width
403.9 mm15.9 in15.9 in403.9 mm
twWeb thickness
27.2 mm1.07 in1.07 in27.2 mm
tfFlange thickness
43.7 mm1.72 in1.72 in43.7 mm

Drawing

403.9 mm15.9 in406.4 mm16 intf 43.7 mmtf 1.72 intw 27.2 mmtw 1.07 ink 58.9 mmk 2.32 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×233 specifications

dDepth16 in406.4 mm
bfFlange width15.9 in403.9 mm
twWeb thickness1.07 in27.2 mm
tfFlange thickness1.72 in43.7 mm
kDesign value2.32 in58.9 mm
kDetailing value3 in76.2 mm
k1Detailing value1 3/4 in44.4 mm
WWeight233 lb/ft346.7 kg/m
AArea68.5 in²44,193 mm²
IxMoment of inertia, strong axis3,010 in⁴125,285.7 cm⁴
ZxPlastic modulus, strong axis436 in³7,144.8 cm³
SxSection modulus, strong axis375 in³6,145.1 cm³
rxRadius of gyration, strong axis6.63 in168.4 mm
IyMoment of inertia, weak axis1,150 in⁴47,866.6 cm⁴
ZyPlastic modulus, weak axis221 in³3,621.5 cm³
SySection modulus, weak axis145 in³2,376.1 cm³
ryRadius of gyration, weak axis4.1 in104.1 mm
JTorsional constant59.5 in⁴2,476.58 cm⁴
bf/2tfFlange slenderness4.62
h/twWeb slenderness10.7
Metric designationW360×347

Also known as

W360×347

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.