W30×235 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×235 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 31.3 in (795.0 mm) deep with a 15.1 in (383.5 mm) flange, a 0.83 in (21.1 mm) web and a 1.5 in (38.1 mm) flange, and weighs 235 lb/ft (349.7 kg/m). Area 69.3 in² (44,710 mm²); strong-axis Ix = 11,700 in⁴ (486,990.8 cm⁴), Sx = 748 in³ (12,257.5 cm³), Zx = 847 in³ (13,879.8 cm³).

dDepth
795.0 mm31.3 in31.3 in795.0 mm
bfFlange width
383.5 mm15.1 in15.1 in383.5 mm
twWeb thickness
21.1 mm0.83 in0.83 in21.1 mm
tfFlange thickness
38.1 mm1.5 in1.5 in38.1 mm

Drawing

383.5 mm15.1 in795.0 mm31.3 intf 38.1 mmtf 1.5 intw 21.1 mmtw 0.83 ink 58.2 mmk 2.29 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×235 specifications

dDepth31.3 in795.0 mm
bfFlange width15.1 in383.5 mm
twWeb thickness0.83 in21.1 mm
tfFlange thickness1.5 in38.1 mm
kDesign value2.29 in58.2 mm
kDetailing value2 3/4 in69.9 mm
k1Detailing value1 5/8 in41.3 mm
WWeight235 lb/ft349.7 kg/m
AArea69.3 in²44,710 mm²
IxMoment of inertia, strong axis11,700 in⁴486,990.8 cm⁴
ZxPlastic modulus, strong axis847 in³13,879.8 cm³
SxSection modulus, strong axis748 in³12,257.5 cm³
rxRadius of gyration, strong axis13 in330.2 mm
IyMoment of inertia, weak axis855 in⁴35,587.8 cm⁴
ZyPlastic modulus, weak axis175 in³2,867.7 cm³
SySection modulus, weak axis114 in³1,868.1 cm³
ryRadius of gyration, weak axis3.51 in89.2 mm
JTorsional constant40.3 in⁴1,677.41 cm⁴
bf/2tfFlange slenderness5.02
h/twWeb slenderness32.2
Metric designationW760×350

Also known as

W760×350

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.