W36×231 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×231 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 36.5 in (927.1 mm) deep with a 16.5 in (419.1 mm) flange, a 0.76 in (19.3 mm) web and a 1.26 in (32.0 mm) flange, and weighs 231 lb/ft (343.8 kg/m). Area 68.2 in² (44,000 mm²); strong-axis Ix = 15,600 in⁴ (649,321 cm⁴), Sx = 854 in³ (13,994.6 cm³), Zx = 963 in³ (15,780.7 cm³).
- dDepth
- 927.1 mm36.5 in36.5 in927.1 mm
- bfFlange width
- 419.1 mm16.5 in16.5 in419.1 mm
- twWeb thickness
- 19.3 mm0.76 in0.76 in19.3 mm
- tfFlange thickness
- 32.0 mm1.26 in1.26 in32.0 mm
Drawing
W36×231 specifications
| dDepth | 36.5 in927.1 mm |
|---|---|
| bfFlange width | 16.5 in419.1 mm |
| twWeb thickness | 0.76 in19.3 mm |
| tfFlange thickness | 1.26 in32.0 mm |
| kDesign value | 2.21 in56.1 mm |
| kDetailing value | 2 9/16 in65.1 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 231 lb/ft343.8 kg/m |
| AArea | 68.2 in²44,000 mm² |
| IxMoment of inertia, strong axis | 15,600 in⁴649,321 cm⁴ |
| ZxPlastic modulus, strong axis | 963 in³15,780.7 cm³ |
| SxSection modulus, strong axis | 854 in³13,994.6 cm³ |
| rxRadius of gyration, strong axis | 15.1 in383.5 mm |
| IyMoment of inertia, weak axis | 940 in⁴39,125.8 cm⁴ |
| ZyPlastic modulus, weak axis | 176 in³2,884.1 cm³ |
| SySection modulus, weak axis | 114 in³1,868.1 cm³ |
| ryRadius of gyration, weak axis | 3.71 in94.2 mm |
| JTorsional constant | 28.7 in⁴1,194.58 cm⁴ |
| bf/2tfFlange slenderness | 6.54 |
| h/twWeb slenderness | 42.2 |
| Metric designation | W920×344 |
Also known as
W920×344
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.