W27×258 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×258 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 29 in (736.6 mm) deep with a 14.3 in (363.2 mm) flange, a 0.98 in (24.9 mm) web and a 1.77 in (45.0 mm) flange, and weighs 258 lb/ft (383.9 kg/m). Area 76.1 in² (49,097 mm²); strong-axis Ix = 10,800 in⁴ (449,529.9 cm⁴), Sx = 745 in³ (12,208.4 cm³), Zx = 852 in³ (13,961.8 cm³).

dDepth
736.6 mm29 in29 in736.6 mm
bfFlange width
363.2 mm14.3 in14.3 in363.2 mm
twWeb thickness
24.9 mm0.98 in0.98 in24.9 mm
tfFlange thickness
45.0 mm1.77 in1.77 in45.0 mm

Drawing

363.2 mm14.3 in736.6 mm29 intf 45.0 mmtf 1.77 intw 24.9 mmtw 0.98 ink 65.0 mmk 2.56 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×258 specifications

dDepth29 in736.6 mm
bfFlange width14.3 in363.2 mm
twWeb thickness0.98 in24.9 mm
tfFlange thickness1.77 in45.0 mm
kDesign value2.56 in65.0 mm
kDetailing value3 in76.2 mm
k1Detailing value1 11/16 in42.9 mm
WWeight258 lb/ft383.9 kg/m
AArea76.1 in²49,097 mm²
IxMoment of inertia, strong axis10,800 in⁴449,529.9 cm⁴
ZxPlastic modulus, strong axis852 in³13,961.8 cm³
SxSection modulus, strong axis745 in³12,208.4 cm³
rxRadius of gyration, strong axis11.9 in302.3 mm
IyMoment of inertia, weak axis859 in⁴35,754.3 cm⁴
ZyPlastic modulus, weak axis187 in³3,064.4 cm³
SySection modulus, weak axis120 in³1,966.4 cm³
ryRadius of gyration, weak axis3.36 in85.3 mm
JTorsional constant61.6 in⁴2,563.99 cm⁴
bf/2tfFlange slenderness4.03
h/twWeb slenderness24.4
Metric designationW690×384

Also known as

W690×384

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.