W12×230 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×230 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 15.1 in (383.5 mm) deep with a 12.9 in (327.7 mm) flange, a 1.29 in (32.8 mm) web and a 2.07 in (52.6 mm) flange, and weighs 230 lb/ft (342.3 kg/m). Area 67.7 in² (43,677 mm²); strong-axis Ix = 2,420 in⁴ (100,728 cm⁴), Sx = 321 in³ (5,260.2 cm³), Zx = 386 in³ (6,325.4 cm³).

dDepth
383.5 mm15.1 in15.1 in383.5 mm
bfFlange width
327.7 mm12.9 in12.9 in327.7 mm
twWeb thickness
32.8 mm1.29 in1.29 in32.8 mm
tfFlange thickness
52.6 mm2.07 in2.07 in52.6 mm

Drawing

327.7 mm12.9 in383.5 mm15.1 intf 52.6 mmtf 2.07 intw 32.8 mmtw 1.29 ink 67.8 mmk 2.67 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×230 specifications

dDepth15.1 in383.5 mm
bfFlange width12.9 in327.7 mm
twWeb thickness1.29 in32.8 mm
tfFlange thickness2.07 in52.6 mm
kDesign value2.67 in67.8 mm
kDetailing value2 15/16 in74.6 mm
k1Detailing value1 1/2 in38.1 mm
WWeight230 lb/ft342.3 kg/m
AArea67.7 in²43,677 mm²
IxMoment of inertia, strong axis2,420 in⁴100,728 cm⁴
ZxPlastic modulus, strong axis386 in³6,325.4 cm³
SxSection modulus, strong axis321 in³5,260.2 cm³
rxRadius of gyration, strong axis5.97 in151.6 mm
IyMoment of inertia, weak axis742 in⁴30,884.4 cm⁴
ZyPlastic modulus, weak axis177 in³2,900.5 cm³
SySection modulus, weak axis115 in³1,884.5 cm³
ryRadius of gyration, weak axis3.31 in84.1 mm
JTorsional constant83.8 in⁴3,488.02 cm⁴
bf/2tfFlange slenderness3.11
h/twWeb slenderness7.6
Metric designationW310×342

Also known as

W310×342

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.