W36×150 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×150 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 35.9 in (911.9 mm) deep with a 12 in (304.8 mm) flange, a 0.625 in (15.9 mm) web and a 0.94 in (23.9 mm) flange, and weighs 150 lb/ft (223.2 kg/m). Area 44.3 in² (28,581 mm²); strong-axis Ix = 9,040 in⁴ (376,273.2 cm⁴), Sx = 504 in³ (8,259.1 cm³), Zx = 581 in³ (9,520.9 cm³).

dDepth
911.9 mm35.9 in35.9 in911.9 mm
bfFlange width
304.8 mm12 in12 in304.8 mm
twWeb thickness
15.9 mm0.625 in0.625 in15.9 mm
tfFlange thickness
23.9 mm0.94 in0.94 in23.9 mm

Drawing

304.8 mm12 in911.9 mm35.9 intf 23.9 mmtf 0.94 intw 15.9 mmtw 0.625 ink 42.9 mmk 1.69 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×150 specifications

dDepth35.9 in911.9 mm
bfFlange width12 in304.8 mm
twWeb thickness0.625 in15.9 mm
tfFlange thickness0.94 in23.9 mm
kDesign value1.69 in42.9 mm
kDetailing value2 3/16 in55.6 mm
k1Detailing value1 1/2 in38.1 mm
WWeight150 lb/ft223.2 kg/m
AArea44.3 in²28,581 mm²
IxMoment of inertia, strong axis9,040 in⁴376,273.2 cm⁴
ZxPlastic modulus, strong axis581 in³9,520.9 cm³
SxSection modulus, strong axis504 in³8,259.1 cm³
rxRadius of gyration, strong axis14.3 in363.2 mm
IyMoment of inertia, weak axis270 in⁴11,238.2 cm⁴
ZyPlastic modulus, weak axis70.9 in³1,161.8 cm³
SySection modulus, weak axis45.1 in³739.1 cm³
ryRadius of gyration, weak axis2.47 in62.7 mm
JTorsional constant10.1 in⁴420.39 cm⁴
bf/2tfFlange slenderness6.37
h/twWeb slenderness51.9
Metric designationW920×223

Also known as

W920×223

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.