W36×361 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×361 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 38 in (965.2 mm) deep with a 16.7 in (424.2 mm) flange, a 1.12 in (28.4 mm) web and a 2.01 in (51.1 mm) flange, and weighs 361 lb/ft (537.2 kg/m). Area 106 in² (68,387 mm²); strong-axis Ix = 25,700 in⁴ (1,069,714.8 cm⁴), Sx = 1,350 in³ (22,122.5 cm³), Zx = 1,550 in³ (25,399.9 cm³).

dDepth
965.2 mm38 in38 in965.2 mm
bfFlange width
424.2 mm16.7 in16.7 in424.2 mm
twWeb thickness
28.4 mm1.12 in1.12 in28.4 mm
tfFlange thickness
51.1 mm2.01 in2.01 in51.1 mm

Drawing

424.2 mm16.7 in965.2 mm38 intf 51.1 mmtf 2.01 intw 28.4 mmtw 1.12 ink 75.2 mmk 2.96 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×361 specifications

dDepth38 in965.2 mm
bfFlange width16.7 in424.2 mm
twWeb thickness1.12 in28.4 mm
tfFlange thickness2.01 in51.1 mm
kDesign value2.96 in75.2 mm
kDetailing value3 5/16 in84.1 mm
k1Detailing value1 3/4 in44.4 mm
WWeight361 lb/ft537.2 kg/m
AArea106 in²68,387 mm²
IxMoment of inertia, strong axis25,700 in⁴1,069,714.8 cm⁴
ZxPlastic modulus, strong axis1,550 in³25,399.9 cm³
SxSection modulus, strong axis1,350 in³22,122.5 cm³
rxRadius of gyration, strong axis15.6 in396.2 mm
IyMoment of inertia, weak axis1,570 in⁴65,348.3 cm⁴
ZyPlastic modulus, weak axis293 in³4,801.4 cm³
SySection modulus, weak axis188 in³3,080.8 cm³
ryRadius of gyration, weak axis3.85 in97.8 mm
JTorsional constant109 in⁴4,536.92 cm⁴
bf/2tfFlange slenderness4.16
h/twWeb slenderness28.6
Metric designationW920×537

Also known as

W920×537

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.