W40×362 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×362 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 40.6 in (1031.2 mm) deep with a 16 in (406.4 mm) flange, a 1.12 in (28.4 mm) web and a 2.01 in (51.1 mm) flange, and weighs 362 lb/ft (538.7 kg/m). Area 106 in² (68,387 mm²); strong-axis Ix = 28,900 in⁴ (1,202,908.8 cm⁴), Sx = 1,420 in³ (23,269.6 cm³), Zx = 1,640 in³ (26,874.8 cm³).
- dDepth
- 1031.2 mm40.6 in40.6 in1031.2 mm
- bfFlange width
- 406.4 mm16 in16 in406.4 mm
- twWeb thickness
- 28.4 mm1.12 in1.12 in28.4 mm
- tfFlange thickness
- 51.1 mm2.01 in2.01 in51.1 mm
Drawing
W40×362 specifications
| dDepth | 40.6 in1031.2 mm |
|---|---|
| bfFlange width | 16 in406.4 mm |
| twWeb thickness | 1.12 in28.4 mm |
| tfFlange thickness | 2.01 in51.1 mm |
| kDesign value | 3.19 in81.0 mm |
| kDetailing value | 3 1/4 in82.6 mm |
| k1Detailing value | 1 3/4 in44.4 mm |
| WWeight | 362 lb/ft538.7 kg/m |
| AArea | 106 in²68,387 mm² |
| IxMoment of inertia, strong axis | 28,900 in⁴1,202,908.8 cm⁴ |
| ZxPlastic modulus, strong axis | 1,640 in³26,874.8 cm³ |
| SxSection modulus, strong axis | 1,420 in³23,269.6 cm³ |
| rxRadius of gyration, strong axis | 16.5 in419.1 mm |
| IyMoment of inertia, weak axis | 1,380 in⁴57,439.9 cm⁴ |
| ZyPlastic modulus, weak axis | 270 in³4,424.5 cm³ |
| SySection modulus, weak axis | 173 in³2,835 cm³ |
| ryRadius of gyration, weak axis | 3.6 in91.4 mm |
| JTorsional constant | 109 in⁴4,536.92 cm⁴ |
| bf/2tfFlange slenderness | 3.99 |
| h/twWeb slenderness | 30.5 |
| Metric designation | W1000×539 |
Also known as
W1000×539
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.