W40×149 Beam Dimensions & Properties

W Shapes (AISC) · W40: 40 in nominal depth

W40×149 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 38.2 in (970.3 mm) deep with a 11.8 in (299.7 mm) flange, a 0.63 in (16.0 mm) web and a 0.83 in (21.1 mm) flange, and weighs 149 lb/ft (221.7 kg/m). Area 43.8 in² (28,258 mm²); strong-axis Ix = 9,800 in⁴ (407,906.8 cm⁴), Sx = 513 in³ (8,406.6 cm³), Zx = 598 in³ (9,799.5 cm³).

dDepth
970.3 mm38.2 in38.2 in970.3 mm
bfFlange width
299.7 mm11.8 in11.8 in299.7 mm
twWeb thickness
16.0 mm0.63 in0.63 in16.0 mm
tfFlange thickness
21.1 mm0.83 in0.83 in21.1 mm

Drawing

299.7 mm11.8 in970.3 mm38.2 intf 21.1 mmtf 0.83 intw 16.0 mmtw 0.63 ink 51.1 mmk 2.01 in
Drawn to scale · Dimensions in mmDimensions in inches

W40×149 specifications

dDepth38.2 in970.3 mm
bfFlange width11.8 in299.7 mm
twWeb thickness0.63 in16.0 mm
tfFlange thickness0.83 in21.1 mm
kDesign value2.01 in51.1 mm
kDetailing value2 1/8 in54.0 mm
k1Detailing value1 1/2 in38.1 mm
WWeight149 lb/ft221.7 kg/m
AArea43.8 in²28,258 mm²
IxMoment of inertia, strong axis9,800 in⁴407,906.8 cm⁴
ZxPlastic modulus, strong axis598 in³9,799.5 cm³
SxSection modulus, strong axis513 in³8,406.6 cm³
rxRadius of gyration, strong axis15 in381.0 mm
IyMoment of inertia, weak axis229 in⁴9,531.7 cm⁴
ZyPlastic modulus, weak axis62.2 in³1,019.3 cm³
SySection modulus, weak axis38.8 in³635.8 cm³
ryRadius of gyration, weak axis2.29 in58.2 mm
JTorsional constant9.36 in⁴389.59 cm⁴
bf/2tfFlange slenderness7.11
h/twWeb slenderness54.3
Metric designationW1000×222

Also known as

W1000×222

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.