W21×147 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×147 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 22.1 in (561.3 mm) deep with a 12.5 in (317.5 mm) flange, a 0.72 in (18.3 mm) web and a 1.15 in (29.2 mm) flange, and weighs 147 lb/ft (218.8 kg/m). Area 43.2 in² (27,871 mm²); strong-axis Ix = 3,630 in⁴ (151,092 cm⁴), Sx = 329 in³ (5,391.3 cm³), Zx = 373 in³ (6,112.4 cm³).

dDepth
561.3 mm22.1 in22.1 in561.3 mm
bfFlange width
317.5 mm12.5 in12.5 in317.5 mm
twWeb thickness
18.3 mm0.72 in0.72 in18.3 mm
tfFlange thickness
29.2 mm1.15 in1.15 in29.2 mm

Drawing

317.5 mm12.5 in561.3 mm22.1 intf 29.2 mmtf 1.15 intw 18.3 mmtw 0.72 ink 41.9 mmk 1.65 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×147 specifications

dDepth22.1 in561.3 mm
bfFlange width12.5 in317.5 mm
twWeb thickness0.72 in18.3 mm
tfFlange thickness1.15 in29.2 mm
kDesign value1.65 in41.9 mm
kDetailing value2 7/16 in61.9 mm
k1Detailing value1 9/16 in39.7 mm
WWeight147 lb/ft218.8 kg/m
AArea43.2 in²27,871 mm²
IxMoment of inertia, strong axis3,630 in⁴151,092 cm⁴
ZxPlastic modulus, strong axis373 in³6,112.4 cm³
SxSection modulus, strong axis329 in³5,391.3 cm³
rxRadius of gyration, strong axis9.17 in232.9 mm
IyMoment of inertia, weak axis376 in⁴15,650.3 cm⁴
ZyPlastic modulus, weak axis92.6 in³1,517.4 cm³
SySection modulus, weak axis60.1 in³984.9 cm³
ryRadius of gyration, weak axis2.95 in74.9 mm
JTorsional constant15.4 in⁴641 cm⁴
bf/2tfFlange slenderness5.44
h/twWeb slenderness26.1
Metric designationW530×219

Also known as

W530×219

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.