W30×148 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×148 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 30.7 in (779.8 mm) deep with a 10.5 in (266.7 mm) flange, a 0.65 in (16.5 mm) web and a 1.18 in (30.0 mm) flange, and weighs 148 lb/ft (220.2 kg/m). Area 43.6 in² (28,129 mm²); strong-axis Ix = 6,680 in⁴ (278,042.6 cm⁴), Sx = 436 in³ (7,144.8 cm³), Zx = 500 in³ (8,193.5 cm³).

dDepth
779.8 mm30.7 in30.7 in779.8 mm
bfFlange width
266.7 mm10.5 in10.5 in266.7 mm
twWeb thickness
16.5 mm0.65 in0.65 in16.5 mm
tfFlange thickness
30.0 mm1.18 in1.18 in30.0 mm

Drawing

266.7 mm10.5 in779.8 mm30.7 intf 30.0 mmtf 1.18 intw 16.5 mmtw 0.65 ink 46.5 mmk 1.83 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×148 specifications

dDepth30.7 in779.8 mm
bfFlange width10.5 in266.7 mm
twWeb thickness0.65 in16.5 mm
tfFlange thickness1.18 in30.0 mm
kDesign value1.83 in46.5 mm
kDetailing value2 1/2 in63.5 mm
k1Detailing value1 9/16 in39.7 mm
WWeight148 lb/ft220.2 kg/m
AArea43.6 in²28,129 mm²
IxMoment of inertia, strong axis6,680 in⁴278,042.6 cm⁴
ZxPlastic modulus, strong axis500 in³8,193.5 cm³
SxSection modulus, strong axis436 in³7,144.8 cm³
rxRadius of gyration, strong axis12.4 in315.0 mm
IyMoment of inertia, weak axis227 in⁴9,448.5 cm⁴
ZyPlastic modulus, weak axis68 in³1,114.3 cm³
SySection modulus, weak axis43.3 in³709.6 cm³
ryRadius of gyration, weak axis2.28 in57.9 mm
JTorsional constant14.5 in⁴603.54 cm⁴
bf/2tfFlange slenderness4.44
h/twWeb slenderness41.6
Metric designationW760×220

Also known as

W760×220

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.