W40×277 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×277 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 39.7 in (1008.4 mm) deep with a 15.8 in (401.3 mm) flange, a 0.83 in (21.1 mm) web and a 1.58 in (40.1 mm) flange, and weighs 277 lb/ft (412.2 kg/m). Area 81.5 in² (52,581 mm²); strong-axis Ix = 21,900 in⁴ (911,546.8 cm⁴), Sx = 1,100 in³ (18,025.8 cm³), Zx = 1,250 in³ (20,483.8 cm³).
- dDepth
- 1008.4 mm39.7 in39.7 in1008.4 mm
- bfFlange width
- 401.3 mm15.8 in15.8 in401.3 mm
- twWeb thickness
- 21.1 mm0.83 in0.83 in21.1 mm
- tfFlange thickness
- 40.1 mm1.58 in1.58 in40.1 mm
Drawing
W40×277 specifications
| dDepth | 39.7 in1008.4 mm |
|---|---|
| bfFlange width | 15.8 in401.3 mm |
| twWeb thickness | 0.83 in21.1 mm |
| tfFlange thickness | 1.58 in40.1 mm |
| kDesign value | 2.76 in70.1 mm |
| kDetailing value | 2 7/8 in73.0 mm |
| k1Detailing value | 1 5/8 in41.3 mm |
| WWeight | 277 lb/ft412.2 kg/m |
| AArea | 81.5 in²52,581 mm² |
| IxMoment of inertia, strong axis | 21,900 in⁴911,546.8 cm⁴ |
| ZxPlastic modulus, strong axis | 1,250 in³20,483.8 cm³ |
| SxSection modulus, strong axis | 1,100 in³18,025.8 cm³ |
| rxRadius of gyration, strong axis | 16.4 in416.6 mm |
| IyMoment of inertia, weak axis | 1,040 in⁴43,288.1 cm⁴ |
| ZyPlastic modulus, weak axis | 204 in³3,343 cm³ |
| SySection modulus, weak axis | 132 in³2,163.1 cm³ |
| ryRadius of gyration, weak axis | 3.58 in90.9 mm |
| JTorsional constant | 51.5 in⁴2,143.59 cm⁴ |
| bf/2tfFlange slenderness | 5.03 |
| h/twWeb slenderness | 41.2 |
| Metric designation | W1000×412 |
Also known as
W1000×412
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.