W40×264 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×264 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 40 in (1016.0 mm) deep with a 11.9 in (302.3 mm) flange, a 0.96 in (24.4 mm) web and a 1.73 in (43.9 mm) flange, and weighs 264 lb/ft (392.9 kg/m). Area 77.4 in² (49,935 mm²); strong-axis Ix = 19,400 in⁴ (807,489 cm⁴), Sx = 971 in³ (15,911.8 cm³), Zx = 1,130 in³ (18,517.4 cm³).
- dDepth
- 1016.0 mm40 in40 in1016.0 mm
- bfFlange width
- 302.3 mm11.9 in11.9 in302.3 mm
- twWeb thickness
- 24.4 mm0.96 in0.96 in24.4 mm
- tfFlange thickness
- 43.9 mm1.73 in1.73 in43.9 mm
Drawing
W40×264 specifications
| dDepth | 40 in1016.0 mm |
|---|---|
| bfFlange width | 11.9 in302.3 mm |
| twWeb thickness | 0.96 in24.4 mm |
| tfFlange thickness | 1.73 in43.9 mm |
| kDesign value | 2.91 in73.9 mm |
| kDetailing value | 3 in76.2 mm |
| k1Detailing value | 1 11/16 in42.9 mm |
| WWeight | 264 lb/ft392.9 kg/m |
| AArea | 77.4 in²49,935 mm² |
| IxMoment of inertia, strong axis | 19,400 in⁴807,489 cm⁴ |
| ZxPlastic modulus, strong axis | 1,130 in³18,517.4 cm³ |
| SxSection modulus, strong axis | 971 in³15,911.8 cm³ |
| rxRadius of gyration, strong axis | 15.8 in401.3 mm |
| IyMoment of inertia, weak axis | 493 in⁴20,520.2 cm⁴ |
| ZyPlastic modulus, weak axis | 132 in³2,163.1 cm³ |
| SySection modulus, weak axis | 82.6 in³1,353.6 cm³ |
| ryRadius of gyration, weak axis | 2.52 in64.0 mm |
| JTorsional constant | 56.1 in⁴2,335.06 cm⁴ |
| bf/2tfFlange slenderness | 3.45 |
| h/twWeb slenderness | 35.6 |
| Metric designation | W1000×393 |
Also known as
W1000×393
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.