W12×279 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×279 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 15.9 in (403.9 mm) deep with a 13.1 in (332.7 mm) flange, a 1.53 in (38.9 mm) web and a 2.47 in (62.7 mm) flange, and weighs 279 lb/ft (415.2 kg/m). Area 81.9 in² (52,839 mm²); strong-axis Ix = 3,110 in⁴ (129,448 cm⁴), Sx = 393 in³ (6,440.1 cm³), Zx = 481 in³ (7,882.2 cm³).

dDepth
403.9 mm15.9 in15.9 in403.9 mm
bfFlange width
332.7 mm13.1 in13.1 in332.7 mm
twWeb thickness
38.9 mm1.53 in1.53 in38.9 mm
tfFlange thickness
62.7 mm2.47 in2.47 in62.7 mm

Drawing

332.7 mm13.1 in403.9 mm15.9 intf 62.7 mmtf 2.47 intw 38.9 mmtw 1.53 ink 78.0 mmk 3.07 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×279 specifications

dDepth15.9 in403.9 mm
bfFlange width13.1 in332.7 mm
twWeb thickness1.53 in38.9 mm
tfFlange thickness2.47 in62.7 mm
kDesign value3.07 in78.0 mm
kDetailing value3 3/8 in85.7 mm
k1Detailing value1 5/8 in41.3 mm
WWeight279 lb/ft415.2 kg/m
AArea81.9 in²52,839 mm²
IxMoment of inertia, strong axis3,110 in⁴129,448 cm⁴
ZxPlastic modulus, strong axis481 in³7,882.2 cm³
SxSection modulus, strong axis393 in³6,440.1 cm³
rxRadius of gyration, strong axis6.16 in156.5 mm
IyMoment of inertia, weak axis937 in⁴39,000.9 cm⁴
ZyPlastic modulus, weak axis220 in³3,605.2 cm³
SySection modulus, weak axis143 in³2,343.4 cm³
ryRadius of gyration, weak axis3.38 in85.9 mm
JTorsional constant143 in⁴5,952.11 cm⁴
bf/2tfFlange slenderness2.66
h/twWeb slenderness6.4
Metric designationW310×415

Also known as

W310×415

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.