W27×281 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×281 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 29.3 in (744.2 mm) deep with a 14.4 in (365.8 mm) flange, a 1.06 in (26.9 mm) web and a 1.93 in (49.0 mm) flange, and weighs 281 lb/ft (418.2 kg/m). Area 83.1 in² (53,613 mm²); strong-axis Ix = 11,900 in⁴ (495,315.4 cm⁴), Sx = 814 in³ (13,339.1 cm³), Zx = 936 in³ (15,338.3 cm³).

dDepth
744.2 mm29.3 in29.3 in744.2 mm
bfFlange width
365.8 mm14.4 in14.4 in365.8 mm
twWeb thickness
26.9 mm1.06 in1.06 in26.9 mm
tfFlange thickness
49.0 mm1.93 in1.93 in49.0 mm

Drawing

365.8 mm14.4 in744.2 mm29.3 intf 49.0 mmtf 1.93 intw 26.9 mmtw 1.06 ink 69.1 mmk 2.72 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×281 specifications

dDepth29.3 in744.2 mm
bfFlange width14.4 in365.8 mm
twWeb thickness1.06 in26.9 mm
tfFlange thickness1.93 in49.0 mm
kDesign value2.72 in69.1 mm
kDetailing value3 1/8 in79.4 mm
k1Detailing value1 3/4 in44.4 mm
WWeight281 lb/ft418.2 kg/m
AArea83.1 in²53,613 mm²
IxMoment of inertia, strong axis11,900 in⁴495,315.4 cm⁴
ZxPlastic modulus, strong axis936 in³15,338.3 cm³
SxSection modulus, strong axis814 in³13,339.1 cm³
rxRadius of gyration, strong axis12 in304.8 mm
IyMoment of inertia, weak axis953 in⁴39,666.9 cm⁴
ZyPlastic modulus, weak axis206 in³3,375.7 cm³
SySection modulus, weak axis133 in³2,179.5 cm³
ryRadius of gyration, weak axis3.39 in86.1 mm
JTorsional constant79.5 in⁴3,309.04 cm⁴
bf/2tfFlange slenderness3.72
h/twWeb slenderness22.5
Metric designationW690×419

Also known as

W690×419

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.