W40×278 Beam Dimensions & Properties

W Shapes (AISC) · W40: 40 in nominal depth

W40×278 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 40.2 in (1021.1 mm) deep with a 12 in (304.8 mm) flange, a 1.03 in (26.2 mm) web and a 1.81 in (46.0 mm) flange, and weighs 278 lb/ft (413.7 kg/m). Area 82.3 in² (53,097 mm²); strong-axis Ix = 20,500 in⁴ (853,274.4 cm⁴), Sx = 1,020 in³ (16,714.8 cm³), Zx = 1,190 in³ (19,500.6 cm³).

dDepth
1021.1 mm40.2 in40.2 in1021.1 mm
bfFlange width
304.8 mm12 in12 in304.8 mm
twWeb thickness
26.2 mm1.03 in1.03 in26.2 mm
tfFlange thickness
46.0 mm1.81 in1.81 in46.0 mm

Drawing

304.8 mm12 in1021.1 mm40.2 intf 46.0 mmtf 1.81 intw 26.2 mmtw 1.03 ink 75.9 mmk 2.99 in
Drawn to scale · Dimensions in mmDimensions in inches

W40×278 specifications

dDepth40.2 in1021.1 mm
bfFlange width12 in304.8 mm
twWeb thickness1.03 in26.2 mm
tfFlange thickness1.81 in46.0 mm
kDesign value2.99 in75.9 mm
kDetailing value3 1/16 in77.8 mm
k1Detailing value1 3/4 in44.4 mm
WWeight278 lb/ft413.7 kg/m
AArea82.3 in²53,097 mm²
IxMoment of inertia, strong axis20,500 in⁴853,274.4 cm⁴
ZxPlastic modulus, strong axis1,190 in³19,500.6 cm³
SxSection modulus, strong axis1,020 in³16,714.8 cm³
rxRadius of gyration, strong axis15.8 in401.3 mm
IyMoment of inertia, weak axis521 in⁴21,685.7 cm⁴
ZyPlastic modulus, weak axis140 in³2,294.2 cm³
SySection modulus, weak axis87.1 in³1,427.3 cm³
ryRadius of gyration, weak axis2.52 in64.0 mm
JTorsional constant65 in⁴2,705.5 cm⁴
bf/2tfFlange slenderness3.31
h/twWeb slenderness33.3
Metric designationW1000×415

Also known as

W1000×415

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.