W36×282 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×282 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 37.1 in (942.3 mm) deep with a 16.6 in (421.6 mm) flange, a 0.885 in (22.5 mm) web and a 1.57 in (39.9 mm) flange, and weighs 282 lb/ft (419.7 kg/m). Area 82.9 in² (53,484 mm²); strong-axis Ix = 19,600 in⁴ (815,813.6 cm⁴), Sx = 1,050 in³ (17,206.4 cm³), Zx = 1,190 in³ (19,500.6 cm³).

dDepth
942.3 mm37.1 in37.1 in942.3 mm
bfFlange width
421.6 mm16.6 in16.6 in421.6 mm
twWeb thickness
22.5 mm0.885 in0.885 in22.5 mm
tfFlange thickness
39.9 mm1.57 in1.57 in39.9 mm

Drawing

421.6 mm16.6 in942.3 mm37.1 intf 39.9 mmtf 1.57 intw 22.5 mmtw 0.885 ink 64.0 mmk 2.52 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×282 specifications

dDepth37.1 in942.3 mm
bfFlange width16.6 in421.6 mm
twWeb thickness0.885 in22.5 mm
tfFlange thickness1.57 in39.9 mm
kDesign value2.52 in64.0 mm
kDetailing value2 7/8 in73.0 mm
k1Detailing value1 5/8 in41.3 mm
WWeight282 lb/ft419.7 kg/m
AArea82.9 in²53,484 mm²
IxMoment of inertia, strong axis19,600 in⁴815,813.6 cm⁴
ZxPlastic modulus, strong axis1,190 in³19,500.6 cm³
SxSection modulus, strong axis1,050 in³17,206.4 cm³
rxRadius of gyration, strong axis15.4 in391.2 mm
IyMoment of inertia, weak axis1,200 in⁴49,947.8 cm⁴
ZyPlastic modulus, weak axis223 in³3,654.3 cm³
SySection modulus, weak axis144 in³2,359.7 cm³
ryRadius of gyration, weak axis3.8 in96.5 mm
JTorsional constant52.7 in⁴2,193.54 cm⁴
bf/2tfFlange slenderness5.29
h/twWeb slenderness36.2
Metric designationW920×420

Also known as

W920×420

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.