W36×286 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×286 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 37.8 in (960.1 mm) deep with a 12.3 in (312.4 mm) flange, a 1.06 in (26.9 mm) web and a 1.93 in (49.0 mm) flange, and weighs 286 lb/ft (425.6 kg/m). Area 83.9 in² (54,129 mm²); strong-axis Ix = 18,900 in⁴ (786,677.4 cm⁴), Sx = 1,000 in³ (16,387.1 cm³), Zx = 1,160 in³ (19,009 cm³).

dDepth
960.1 mm37.8 in37.8 in960.1 mm
bfFlange width
312.4 mm12.3 in12.3 in312.4 mm
twWeb thickness
26.9 mm1.06 in1.06 in26.9 mm
tfFlange thickness
49.0 mm1.93 in1.93 in49.0 mm

Drawing

312.4 mm12.3 in960.1 mm37.8 intf 49.0 mmtf 1.93 intw 26.9 mmtw 1.06 ink 68.1 mmk 2.68 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×286 specifications

dDepth37.8 in960.1 mm
bfFlange width12.3 in312.4 mm
twWeb thickness1.06 in26.9 mm
tfFlange thickness1.93 in49.0 mm
kDesign value2.68 in68.1 mm
kDetailing value3 1/8 in79.4 mm
k1Detailing value1 3/4 in44.4 mm
WWeight286 lb/ft425.6 kg/m
AArea83.9 in²54,129 mm²
IxMoment of inertia, strong axis18,900 in⁴786,677.4 cm⁴
ZxPlastic modulus, strong axis1,160 in³19,009 cm³
SxSection modulus, strong axis1,000 in³16,387.1 cm³
rxRadius of gyration, strong axis15 in381.0 mm
IyMoment of inertia, weak axis602 in⁴25,057.1 cm⁴
ZyPlastic modulus, weak axis156 in³2,556.4 cm³
SySection modulus, weak axis97.9 in³1,604.3 cm³
ryRadius of gyration, weak axis2.68 in68.1 mm
JTorsional constant72.8 in⁴3,030.16 cm⁴
bf/2tfFlange slenderness3.19
h/twWeb slenderness30.6
Metric designationW920×425

Also known as

W920×425

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.