W40×294 Beam Dimensions & Properties

W Shapes (AISC) · W40: 40 in nominal depth

W40×294 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 40.4 in (1026.2 mm) deep with a 12 in (304.8 mm) flange, a 1.06 in (26.9 mm) web and a 1.93 in (49.0 mm) flange, and weighs 294 lb/ft (437.5 kg/m). Area 86.2 in² (55,613 mm²); strong-axis Ix = 21,900 in⁴ (911,546.8 cm⁴), Sx = 1,080 in³ (17,698 cm³), Zx = 1,270 in³ (20,811.6 cm³).

dDepth
1026.2 mm40.4 in40.4 in1026.2 mm
bfFlange width
304.8 mm12 in12 in304.8 mm
twWeb thickness
26.9 mm1.06 in1.06 in26.9 mm
tfFlange thickness
49.0 mm1.93 in1.93 in49.0 mm

Drawing

304.8 mm12 in1026.2 mm40.4 intf 49.0 mmtf 1.93 intw 26.9 mmtw 1.06 ink 79.0 mmk 3.11 in
Drawn to scale · Dimensions in mmDimensions in inches

W40×294 specifications

dDepth40.4 in1026.2 mm
bfFlange width12 in304.8 mm
twWeb thickness1.06 in26.9 mm
tfFlange thickness1.93 in49.0 mm
kDesign value3.11 in79.0 mm
kDetailing value3 3/16 in81.0 mm
k1Detailing value1 3/4 in44.4 mm
WWeight294 lb/ft437.5 kg/m
AArea86.2 in²55,613 mm²
IxMoment of inertia, strong axis21,900 in⁴911,546.8 cm⁴
ZxPlastic modulus, strong axis1,270 in³20,811.6 cm³
SxSection modulus, strong axis1,080 in³17,698 cm³
rxRadius of gyration, strong axis15.9 in403.9 mm
IyMoment of inertia, weak axis562 in⁴23,392.2 cm⁴
ZyPlastic modulus, weak axis150 in³2,458.1 cm³
SySection modulus, weak axis93.5 in³1,532.2 cm³
ryRadius of gyration, weak axis2.55 in64.8 mm
JTorsional constant76.6 in⁴3,188.33 cm⁴
bf/2tfFlange slenderness3.11
h/twWeb slenderness32.2
Metric designationW1000×438

Also known as

W1000×438

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.