W24×104 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×104 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 24.1 in (612.1 mm) deep with a 12.8 in (325.1 mm) flange, a 0.5 in (12.7 mm) web and a 0.75 in (19.0 mm) flange, and weighs 104 lb/ft (154.8 kg/m). Area 30.7 in² (19,806 mm²); strong-axis Ix = 3,100 in⁴ (129,031.7 cm⁴), Sx = 258 in³ (4,227.9 cm³), Zx = 289 in³ (4,735.9 cm³).

dDepth
612.1 mm24.1 in24.1 in612.1 mm
bfFlange width
325.1 mm12.8 in12.8 in325.1 mm
twWeb thickness
12.7 mm0.5 in0.5 in12.7 mm
tfFlange thickness
19.0 mm0.75 in0.75 in19.0 mm

Drawing

325.1 mm12.8 in612.1 mm24.1 intf 19.0 mmtf 0.75 intw 12.7 mmtw 0.5 ink 31.8 mmk 1.25 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×104 specifications

dDepth24.1 in612.1 mm
bfFlange width12.8 in325.1 mm
twWeb thickness0.5 in12.7 mm
tfFlange thickness0.75 in19.0 mm
kDesign value1.25 in31.8 mm
kDetailing value2 1/16 in52.4 mm
k1Detailing value1 7/16 in36.5 mm
WWeight104 lb/ft154.8 kg/m
AArea30.7 in²19,806 mm²
IxMoment of inertia, strong axis3,100 in⁴129,031.7 cm⁴
ZxPlastic modulus, strong axis289 in³4,735.9 cm³
SxSection modulus, strong axis258 in³4,227.9 cm³
rxRadius of gyration, strong axis10.1 in256.5 mm
IyMoment of inertia, weak axis259 in⁴10,780.4 cm⁴
ZyPlastic modulus, weak axis62.4 in³1,022.6 cm³
SySection modulus, weak axis40.7 in³667 cm³
ryRadius of gyration, weak axis2.91 in73.9 mm
JTorsional constant4.72 in⁴196.46 cm⁴
bf/2tfFlange slenderness8.5
h/twWeb slenderness43.1
Metric designationW610×155

Also known as

W610×155

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.