W24×131 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×131 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 24.5 in (622.3 mm) deep with a 12.9 in (327.7 mm) flange, a 0.605 in (15.4 mm) web and a 0.96 in (24.4 mm) flange, and weighs 131 lb/ft (194.9 kg/m). Area 38.6 in² (24,903 mm²); strong-axis Ix = 4,020 in⁴ (167,325 cm⁴), Sx = 329 in³ (5,391.3 cm³), Zx = 370 in³ (6,063.2 cm³).

dDepth
622.3 mm24.5 in24.5 in622.3 mm
bfFlange width
327.7 mm12.9 in12.9 in327.7 mm
twWeb thickness
15.4 mm0.605 in0.605 in15.4 mm
tfFlange thickness
24.4 mm0.96 in0.96 in24.4 mm

Drawing

327.7 mm12.9 in622.3 mm24.5 intf 24.4 mmtf 0.96 intw 15.4 mmtw 0.605 ink 37.1 mmk 1.46 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×131 specifications

dDepth24.5 in622.3 mm
bfFlange width12.9 in327.7 mm
twWeb thickness0.605 in15.4 mm
tfFlange thickness0.96 in24.4 mm
kDesign value1.46 in37.1 mm
kDetailing value2 1/4 in57.2 mm
k1Detailing value1 1/2 in38.1 mm
WWeight131 lb/ft194.9 kg/m
AArea38.6 in²24,903 mm²
IxMoment of inertia, strong axis4,020 in⁴167,325 cm⁴
ZxPlastic modulus, strong axis370 in³6,063.2 cm³
SxSection modulus, strong axis329 in³5,391.3 cm³
rxRadius of gyration, strong axis10.2 in259.1 mm
IyMoment of inertia, weak axis340 in⁴14,151.9 cm⁴
ZyPlastic modulus, weak axis81.5 in³1,335.5 cm³
SySection modulus, weak axis53 in³868.5 cm³
ryRadius of gyration, weak axis2.97 in75.4 mm
JTorsional constant9.5 in⁴395.42 cm⁴
bf/2tfFlange slenderness6.7
h/twWeb slenderness35.6
Metric designationW610×195

Also known as

W610×195

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.