W36×135 Beam Dimensions & Properties

W Shapes (AISC) · W36: 36 in nominal depth

W36×135 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 35.6 in (904.2 mm) deep with a 12 in (304.8 mm) flange, a 0.6 in (15.2 mm) web and a 0.79 in (20.1 mm) flange, and weighs 135 lb/ft (200.9 kg/m). Area 39.9 in² (25,742 mm²); strong-axis Ix = 7,800 in⁴ (324,660.5 cm⁴), Sx = 439 in³ (7,193.9 cm³), Zx = 509 in³ (8,341 cm³).

dDepth
904.2 mm35.6 in35.6 in904.2 mm
bfFlange width
304.8 mm12 in12 in304.8 mm
twWeb thickness
15.2 mm0.6 in0.6 in15.2 mm
tfFlange thickness
20.1 mm0.79 in0.79 in20.1 mm

Drawing

304.8 mm12 in904.2 mm35.6 intf 20.1 mmtf 0.79 intw 15.2 mmtw 0.6 ink 39.1 mmk 1.54 in
Drawn to scale · Dimensions in mmDimensions in inches

W36×135 specifications

dDepth35.6 in904.2 mm
bfFlange width12 in304.8 mm
twWeb thickness0.6 in15.2 mm
tfFlange thickness0.79 in20.1 mm
kDesign value1.54 in39.1 mm
kDetailing value2 1/16 in52.4 mm
k1Detailing value1 1/2 in38.1 mm
WWeight135 lb/ft200.9 kg/m
AArea39.9 in²25,742 mm²
IxMoment of inertia, strong axis7,800 in⁴324,660.5 cm⁴
ZxPlastic modulus, strong axis509 in³8,341 cm³
SxSection modulus, strong axis439 in³7,193.9 cm³
rxRadius of gyration, strong axis14 in355.6 mm
IyMoment of inertia, weak axis225 in⁴9,365.2 cm⁴
ZyPlastic modulus, weak axis59.7 in³978.3 cm³
SySection modulus, weak axis37.7 in³617.8 cm³
ryRadius of gyration, weak axis2.38 in60.5 mm
JTorsional constant7 in⁴291.36 cm⁴
bf/2tfFlange slenderness7.56
h/twWeb slenderness54.1
Metric designationW920×201

Also known as

W920×201

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.