W14×132 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×132 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14.7 in (373.4 mm) deep with a 14.7 in (373.4 mm) flange, a 0.645 in (16.4 mm) web and a 1.03 in (26.2 mm) flange, and weighs 132 lb/ft (196.4 kg/m). Area 38.8 in² (25,032 mm²); strong-axis Ix = 1,530 in⁴ (63,683.4 cm⁴), Sx = 209 in³ (3,424.9 cm³), Zx = 234 in³ (3,834.6 cm³).
- dDepth
- 373.4 mm14.7 in14.7 in373.4 mm
- bfFlange width
- 373.4 mm14.7 in14.7 in373.4 mm
- twWeb thickness
- 16.4 mm0.645 in0.645 in16.4 mm
- tfFlange thickness
- 26.2 mm1.03 in1.03 in26.2 mm
Drawing
W14×132 specifications
| dDepth | 14.7 in373.4 mm |
|---|---|
| bfFlange width | 14.7 in373.4 mm |
| twWeb thickness | 0.645 in16.4 mm |
| tfFlange thickness | 1.03 in26.2 mm |
| kDesign value | 1.63 in41.4 mm |
| kDetailing value | 2 5/16 in58.7 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 132 lb/ft196.4 kg/m |
| AArea | 38.8 in²25,032 mm² |
| IxMoment of inertia, strong axis | 1,530 in⁴63,683.4 cm⁴ |
| ZxPlastic modulus, strong axis | 234 in³3,834.6 cm³ |
| SxSection modulus, strong axis | 209 in³3,424.9 cm³ |
| rxRadius of gyration, strong axis | 6.28 in159.5 mm |
| IyMoment of inertia, weak axis | 548 in⁴22,809.5 cm⁴ |
| ZyPlastic modulus, weak axis | 113 in³1,851.7 cm³ |
| SySection modulus, weak axis | 74.5 in³1,220.8 cm³ |
| ryRadius of gyration, weak axis | 3.76 in95.5 mm |
| JTorsional constant | 12.3 in⁴511.96 cm⁴ |
| bf/2tfFlange slenderness | 7.15 |
| h/twWeb slenderness | 17.7 |
| Metric designation | W360×196 |
Also known as
W360×196
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.