W40×297 Beam Dimensions & Properties
W Shapes (AISC) · W40: 40 in nominal depth
W40×297 is an AISC wide-flange shape (W40: 40 in nominal depth). It is 39.8 in (1010.9 mm) deep with a 15.8 in (401.3 mm) flange, a 0.93 in (23.6 mm) web and a 1.65 in (41.9 mm) flange, and weighs 297 lb/ft (442.0 kg/m). Area 87.3 in² (56,322 mm²); strong-axis Ix = 23,200 in⁴ (965,656.9 cm⁴), Sx = 1,170 in³ (19,172.9 cm³), Zx = 1,330 in³ (21,794.8 cm³).
- dDepth
- 1010.9 mm39.8 in39.8 in1010.9 mm
- bfFlange width
- 401.3 mm15.8 in15.8 in401.3 mm
- twWeb thickness
- 23.6 mm0.93 in0.93 in23.6 mm
- tfFlange thickness
- 41.9 mm1.65 in1.65 in41.9 mm
Drawing
W40×297 specifications
| dDepth | 39.8 in1010.9 mm |
|---|---|
| bfFlange width | 15.8 in401.3 mm |
| twWeb thickness | 0.93 in23.6 mm |
| tfFlange thickness | 1.65 in41.9 mm |
| kDesign value | 2.83 in71.9 mm |
| kDetailing value | 2 15/16 in74.6 mm |
| k1Detailing value | 1 11/16 in42.9 mm |
| WWeight | 297 lb/ft442.0 kg/m |
| AArea | 87.3 in²56,322 mm² |
| IxMoment of inertia, strong axis | 23,200 in⁴965,656.9 cm⁴ |
| ZxPlastic modulus, strong axis | 1,330 in³21,794.8 cm³ |
| SxSection modulus, strong axis | 1,170 in³19,172.9 cm³ |
| rxRadius of gyration, strong axis | 16.3 in414.0 mm |
| IyMoment of inertia, weak axis | 1,090 in⁴45,369.2 cm⁴ |
| ZyPlastic modulus, weak axis | 215 in³3,523.2 cm³ |
| SySection modulus, weak axis | 138 in³2,261.4 cm³ |
| ryRadius of gyration, weak axis | 3.54 in89.9 mm |
| JTorsional constant | 61.2 in⁴2,547.34 cm⁴ |
| bf/2tfFlange slenderness | 4.8 |
| h/twWeb slenderness | 36.8 |
| Metric designation | W1000×443 |
Also known as
W1000×443
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.