W18×130 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×130 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 19.3 in (490.2 mm) deep with a 11.2 in (284.5 mm) flange, a 0.67 in (17.0 mm) web and a 1.2 in (30.5 mm) flange, and weighs 130 lb/ft (193.5 kg/m). Area 38.3 in² (24,710 mm²); strong-axis Ix = 2,460 in⁴ (102,392.9 cm⁴), Sx = 256 in³ (4,195.1 cm³), Zx = 290 in³ (4,752.2 cm³).

dDepth
490.2 mm19.3 in19.3 in490.2 mm
bfFlange width
284.5 mm11.2 in11.2 in284.5 mm
twWeb thickness
17.0 mm0.67 in0.67 in17.0 mm
tfFlange thickness
30.5 mm1.2 in1.2 in30.5 mm

Drawing

284.5 mm11.2 in490.2 mm19.3 intf 30.5 mmtf 1.2 intw 17.0 mmtw 0.67 ink 40.6 mmk 1.6 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×130 specifications

dDepth19.3 in490.2 mm
bfFlange width11.2 in284.5 mm
twWeb thickness0.67 in17.0 mm
tfFlange thickness1.2 in30.5 mm
kDesign value1.6 in40.6 mm
kDetailing value2 1/16 in52.4 mm
k1Detailing value1 3/16 in30.2 mm
WWeight130 lb/ft193.5 kg/m
AArea38.3 in²24,710 mm²
IxMoment of inertia, strong axis2,460 in⁴102,392.9 cm⁴
ZxPlastic modulus, strong axis290 in³4,752.2 cm³
SxSection modulus, strong axis256 in³4,195.1 cm³
rxRadius of gyration, strong axis8.03 in204.0 mm
IyMoment of inertia, weak axis278 in⁴11,571.2 cm⁴
ZyPlastic modulus, weak axis76.7 in³1,256.9 cm³
SySection modulus, weak axis49.9 in³817.7 cm³
ryRadius of gyration, weak axis2.7 in68.6 mm
JTorsional constant14.5 in⁴603.54 cm⁴
bf/2tfFlange slenderness4.65
h/twWeb slenderness23.9
Metric designationW460×193

Also known as

W460×193

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.