W30×261 Beam Dimensions & Properties
W Shapes (AISC) · W30: 30 in nominal depth
W30×261 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 31.6 in (802.6 mm) deep with a 15.2 in (386.1 mm) flange, a 0.93 in (23.6 mm) web and a 1.65 in (41.9 mm) flange, and weighs 261 lb/ft (388.4 kg/m). Area 77 in² (49,677 mm²); strong-axis Ix = 13,100 in⁴ (545,263.2 cm⁴), Sx = 829 in³ (13,584.9 cm³), Zx = 943 in³ (15,453 cm³).
- dDepth
- 802.6 mm31.6 in31.6 in802.6 mm
- bfFlange width
- 386.1 mm15.2 in15.2 in386.1 mm
- twWeb thickness
- 23.6 mm0.93 in0.93 in23.6 mm
- tfFlange thickness
- 41.9 mm1.65 in1.65 in41.9 mm
Drawing
W30×261 specifications
| dDepth | 31.6 in802.6 mm |
|---|---|
| bfFlange width | 15.2 in386.1 mm |
| twWeb thickness | 0.93 in23.6 mm |
| tfFlange thickness | 1.65 in41.9 mm |
| kDesign value | 2.44 in62.0 mm |
| kDetailing value | 2 15/16 in74.6 mm |
| k1Detailing value | 1 11/16 in42.9 mm |
| WWeight | 261 lb/ft388.4 kg/m |
| AArea | 77 in²49,677 mm² |
| IxMoment of inertia, strong axis | 13,100 in⁴545,263.2 cm⁴ |
| ZxPlastic modulus, strong axis | 943 in³15,453 cm³ |
| SxSection modulus, strong axis | 829 in³13,584.9 cm³ |
| rxRadius of gyration, strong axis | 13.1 in332.7 mm |
| IyMoment of inertia, weak axis | 959 in⁴39,916.6 cm⁴ |
| ZyPlastic modulus, weak axis | 196 in³3,211.9 cm³ |
| SySection modulus, weak axis | 127 in³2,081.2 cm³ |
| ryRadius of gyration, weak axis | 3.53 in89.7 mm |
| JTorsional constant | 54.1 in⁴2,251.81 cm⁴ |
| bf/2tfFlange slenderness | 4.59 |
| h/twWeb slenderness | 28.7 |
| Metric designation | W760×389 |
Also known as
W760×389
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.