W33×263 Beam Dimensions & Properties
W Shapes (AISC) · W33: 33 in nominal depth
W33×263 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 34.5 in (876.3 mm) deep with a 15.8 in (401.3 mm) flange, a 0.87 in (22.1 mm) web and a 1.57 in (39.9 mm) flange, and weighs 263 lb/ft (391.4 kg/m). Area 77.4 in² (49,935 mm²); strong-axis Ix = 15,900 in⁴ (661,808 cm⁴), Sx = 919 in³ (15,059.7 cm³), Zx = 1,040 in³ (17,042.5 cm³).
- dDepth
- 876.3 mm34.5 in34.5 in876.3 mm
- bfFlange width
- 401.3 mm15.8 in15.8 in401.3 mm
- twWeb thickness
- 22.1 mm0.87 in0.87 in22.1 mm
- tfFlange thickness
- 39.9 mm1.57 in1.57 in39.9 mm
Drawing
W33×263 specifications
| dDepth | 34.5 in876.3 mm |
|---|---|
| bfFlange width | 15.8 in401.3 mm |
| twWeb thickness | 0.87 in22.1 mm |
| tfFlange thickness | 1.57 in39.9 mm |
| kDesign value | 2.36 in59.9 mm |
| kDetailing value | 2 13/16 in71.4 mm |
| k1Detailing value | 1 5/8 in41.3 mm |
| WWeight | 263 lb/ft391.4 kg/m |
| AArea | 77.4 in²49,935 mm² |
| IxMoment of inertia, strong axis | 15,900 in⁴661,808 cm⁴ |
| ZxPlastic modulus, strong axis | 1,040 in³17,042.5 cm³ |
| SxSection modulus, strong axis | 919 in³15,059.7 cm³ |
| rxRadius of gyration, strong axis | 14.3 in363.2 mm |
| IyMoment of inertia, weak axis | 1,040 in⁴43,288.1 cm⁴ |
| ZyPlastic modulus, weak axis | 202 in³3,310.2 cm³ |
| SySection modulus, weak axis | 131 in³2,146.7 cm³ |
| ryRadius of gyration, weak axis | 3.66 in93.0 mm |
| JTorsional constant | 48.7 in⁴2,027.05 cm⁴ |
| bf/2tfFlange slenderness | 5.03 |
| h/twWeb slenderness | 34.3 |
| Metric designation | W840×392 |
Also known as
W840×392
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.