W36×262 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×262 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 36.9 in (937.3 mm) deep with a 16.6 in (421.6 mm) flange, a 0.84 in (21.3 mm) web and a 1.44 in (36.6 mm) flange, and weighs 262 lb/ft (389.9 kg/m). Area 77.2 in² (49,806 mm²); strong-axis Ix = 17,900 in⁴ (745,054.3 cm⁴), Sx = 972 in³ (15,928.2 cm³), Zx = 1,100 in³ (18,025.8 cm³).
- dDepth
- 937.3 mm36.9 in36.9 in937.3 mm
- bfFlange width
- 421.6 mm16.6 in16.6 in421.6 mm
- twWeb thickness
- 21.3 mm0.84 in0.84 in21.3 mm
- tfFlange thickness
- 36.6 mm1.44 in1.44 in36.6 mm
Drawing
W36×262 specifications
| dDepth | 36.9 in937.3 mm |
|---|---|
| bfFlange width | 16.6 in421.6 mm |
| twWeb thickness | 0.84 in21.3 mm |
| tfFlange thickness | 1.44 in36.6 mm |
| kDesign value | 2.39 in60.7 mm |
| kDetailing value | 2 3/4 in69.9 mm |
| k1Detailing value | 1 5/8 in41.3 mm |
| WWeight | 262 lb/ft389.9 kg/m |
| AArea | 77.2 in²49,806 mm² |
| IxMoment of inertia, strong axis | 17,900 in⁴745,054.3 cm⁴ |
| ZxPlastic modulus, strong axis | 1,100 in³18,025.8 cm³ |
| SxSection modulus, strong axis | 972 in³15,928.2 cm³ |
| rxRadius of gyration, strong axis | 15.3 in388.6 mm |
| IyMoment of inertia, weak axis | 1,090 in⁴45,369.2 cm⁴ |
| ZyPlastic modulus, weak axis | 204 in³3,343 cm³ |
| SySection modulus, weak axis | 132 in³2,163.1 cm³ |
| ryRadius of gyration, weak axis | 3.76 in95.5 mm |
| JTorsional constant | 41.6 in⁴1,731.52 cm⁴ |
| bf/2tfFlange slenderness | 5.75 |
| h/twWeb slenderness | 38.2 |
| Metric designation | W920×390 |
Also known as
W920×390
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.