W18×258 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×258 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 21.5 in (546.1 mm) deep with a 11.8 in (299.7 mm) flange, a 1.28 in (32.5 mm) web and a 2.3 in (58.4 mm) flange, and weighs 258 lb/ft (383.9 kg/m). Area 76 in² (49,032 mm²); strong-axis Ix = 5,510 in⁴ (229,343.5 cm⁴), Sx = 514 in³ (8,423 cm³), Zx = 611 in³ (10,012.5 cm³).

dDepth
546.1 mm21.5 in21.5 in546.1 mm
bfFlange width
299.7 mm11.8 in11.8 in299.7 mm
twWeb thickness
32.5 mm1.28 in1.28 in32.5 mm
tfFlange thickness
58.4 mm2.3 in2.3 in58.4 mm

Drawing

299.7 mm11.8 in546.1 mm21.5 intf 58.4 mmtf 2.3 intw 32.5 mmtw 1.28 ink 68.6 mmk 2.7 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×258 specifications

dDepth21.5 in546.1 mm
bfFlange width11.8 in299.7 mm
twWeb thickness1.28 in32.5 mm
tfFlange thickness2.3 in58.4 mm
kDesign value2.7 in68.6 mm
kDetailing value3 3/16 in81.0 mm
k1Detailing value1 7/16 in36.5 mm
WWeight258 lb/ft383.9 kg/m
AArea76 in²49,032 mm²
IxMoment of inertia, strong axis5,510 in⁴229,343.5 cm⁴
ZxPlastic modulus, strong axis611 in³10,012.5 cm³
SxSection modulus, strong axis514 in³8,423 cm³
rxRadius of gyration, strong axis8.53 in216.7 mm
IyMoment of inertia, weak axis628 in⁴26,139.3 cm⁴
ZyPlastic modulus, weak axis166 in³2,720.3 cm³
SySection modulus, weak axis107 in³1,753.4 cm³
ryRadius of gyration, weak axis2.88 in73.2 mm
JTorsional constant103 in⁴4,287.18 cm⁴
bf/2tfFlange slenderness2.56
h/twWeb slenderness12.5
Metric designationW460×384

Also known as

W460×384

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.