W44×262 Beam Dimensions & Properties

W Shapes (AISC) · W44: 44 in nominal depth

W44×262 is an AISC wide-flange shape (W44: 44 in nominal depth). It is 43.3 in (1099.8 mm) deep with a 15.8 in (401.3 mm) flange, a 0.785 in (19.9 mm) web and a 1.42 in (36.1 mm) flange, and weighs 262 lb/ft (389.9 kg/m). Area 77.2 in² (49,806 mm²); strong-axis Ix = 24,100 in⁴ (1,003,117.7 cm⁴), Sx = 1,110 in³ (18,189.6 cm³), Zx = 1,270 in³ (20,811.6 cm³).

dDepth
1099.8 mm43.3 in43.3 in1099.8 mm
bfFlange width
401.3 mm15.8 in15.8 in401.3 mm
twWeb thickness
19.9 mm0.785 in0.785 in19.9 mm
tfFlange thickness
36.1 mm1.42 in1.42 in36.1 mm

Drawing

401.3 mm15.8 in1099.8 mm43.3 intf 36.1 mmtf 1.42 intw 19.9 mmtw 0.785 ink 55.9 mmk 2.2 in
Drawn to scale · Dimensions in mmDimensions in inches

W44×262 specifications

dDepth43.3 in1099.8 mm
bfFlange width15.8 in401.3 mm
twWeb thickness0.785 in19.9 mm
tfFlange thickness1.42 in36.1 mm
kDesign value2.2 in55.9 mm
kDetailing value2 5/8 in66.7 mm
k1Detailing value1 5/8 in41.3 mm
WWeight262 lb/ft389.9 kg/m
AArea77.2 in²49,806 mm²
IxMoment of inertia, strong axis24,100 in⁴1,003,117.7 cm⁴
ZxPlastic modulus, strong axis1,270 in³20,811.6 cm³
SxSection modulus, strong axis1,110 in³18,189.6 cm³
rxRadius of gyration, strong axis17.7 in449.6 mm
IyMoment of inertia, weak axis923 in⁴38,418.2 cm⁴
ZyPlastic modulus, weak axis182 in³2,982.4 cm³
SySection modulus, weak axis117 in³1,917.3 cm³
ryRadius of gyration, weak axis3.47 in88.1 mm
JTorsional constant37.3 in⁴1,552.54 cm⁴
bf/2tfFlange slenderness5.57
h/twWeb slenderness49.6
Metric designationW1100×390

Also known as

W1100×390

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.