W44×290 Beam Dimensions & Properties

W Shapes (AISC) · W44: 44 in nominal depth

W44×290 is an AISC wide-flange shape (W44: 44 in nominal depth). It is 43.6 in (1107.4 mm) deep with a 15.8 in (401.3 mm) flange, a 0.865 in (22.0 mm) web and a 1.58 in (40.1 mm) flange, and weighs 290 lb/ft (431.6 kg/m). Area 85.4 in² (55,097 mm²); strong-axis Ix = 27,000 in⁴ (1,123,824.8 cm⁴), Sx = 1,240 in³ (20,320 cm³), Zx = 1,410 in³ (23,105.8 cm³).

dDepth
1107.4 mm43.6 in43.6 in1107.4 mm
bfFlange width
401.3 mm15.8 in15.8 in401.3 mm
twWeb thickness
22.0 mm0.865 in0.865 in22.0 mm
tfFlange thickness
40.1 mm1.58 in1.58 in40.1 mm

Drawing

401.3 mm15.8 in1107.4 mm43.6 intf 40.1 mmtf 1.58 intw 22.0 mmtw 0.865 ink 59.9 mmk 2.36 in
Drawn to scale · Dimensions in mmDimensions in inches

W44×290 specifications

dDepth43.6 in1107.4 mm
bfFlange width15.8 in401.3 mm
twWeb thickness0.865 in22.0 mm
tfFlange thickness1.58 in40.1 mm
kDesign value2.36 in59.9 mm
kDetailing value2 13/16 in71.4 mm
k1Detailing value1 5/8 in41.3 mm
WWeight290 lb/ft431.6 kg/m
AArea85.4 in²55,097 mm²
IxMoment of inertia, strong axis27,000 in⁴1,123,824.8 cm⁴
ZxPlastic modulus, strong axis1,410 in³23,105.8 cm³
SxSection modulus, strong axis1,240 in³20,320 cm³
rxRadius of gyration, strong axis17.8 in452.1 mm
IyMoment of inertia, weak axis1,040 in⁴43,288.1 cm⁴
ZyPlastic modulus, weak axis205 in³3,359.3 cm³
SySection modulus, weak axis132 in³2,163.1 cm³
ryRadius of gyration, weak axis3.49 in88.6 mm
JTorsional constant50.9 in⁴2,118.62 cm⁴
bf/2tfFlange slenderness5.02
h/twWeb slenderness45
Metric designationW1100×433

Also known as

W1100×433

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.