W30×292 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×292 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 32 in (812.8 mm) deep with a 15.3 in (388.6 mm) flange, a 1.02 in (25.9 mm) web and a 1.85 in (47.0 mm) flange, and weighs 292 lb/ft (434.5 kg/m). Area 86 in² (55,484 mm²); strong-axis Ix = 14,900 in⁴ (620,184.8 cm⁴), Sx = 930 in³ (15,240 cm³), Zx = 1,060 in³ (17,370.3 cm³).

dDepth
812.8 mm32 in32 in812.8 mm
bfFlange width
388.6 mm15.3 in15.3 in388.6 mm
twWeb thickness
25.9 mm1.02 in1.02 in25.9 mm
tfFlange thickness
47.0 mm1.85 in1.85 in47.0 mm

Drawing

388.6 mm15.3 in812.8 mm32 intf 47.0 mmtf 1.85 intw 25.9 mmtw 1.02 ink 67.1 mmk 2.64 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×292 specifications

dDepth32 in812.8 mm
bfFlange width15.3 in388.6 mm
twWeb thickness1.02 in25.9 mm
tfFlange thickness1.85 in47.0 mm
kDesign value2.64 in67.1 mm
kDetailing value3 1/8 in79.4 mm
k1Detailing value1 3/4 in44.4 mm
WWeight292 lb/ft434.5 kg/m
AArea86 in²55,484 mm²
IxMoment of inertia, strong axis14,900 in⁴620,184.8 cm⁴
ZxPlastic modulus, strong axis1,060 in³17,370.3 cm³
SxSection modulus, strong axis930 in³15,240 cm³
rxRadius of gyration, strong axis13.2 in335.3 mm
IyMoment of inertia, weak axis1,100 in⁴45,785.5 cm⁴
ZyPlastic modulus, weak axis223 in³3,654.3 cm³
SySection modulus, weak axis144 in³2,359.7 cm³
ryRadius of gyration, weak axis3.58 in90.9 mm
JTorsional constant75.2 in⁴3,130.06 cm⁴
bf/2tfFlange slenderness4.12
h/twWeb slenderness26.2
Metric designationW760×434

Also known as

W760×434

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.