Crimp Terminal and Ferrule Color Codes
Insulated crimp terminals are color-coded by wire size: red 22–18 AWG (some brands 22–16; 0.5–1.5 mm²), blue 16–14 AWG (1.5–2.5 mm²), yellow 12–10 AWG (4–6 mm²). Wire-end ferrules use two different color systems (DIN 46228-4 and the French code), so a grey ferrule can be 0.75, 2.5 or 4 mm² depending on which one the maker follows.
Color codesWire cross-section the terminal or ferrule is made for
| Size | Color | Wire sizemm² | AWG |
|---|---|---|---|
| Insulated terminals and splices | |||
| 0.5–1.5 mm² | red | 0.5–1.5 | 22–18 AWG (22–16 some brands) |
| 1.5–2.5 mm² | blue | 1.5–2.5 | 16–14 AWG |
| 4–6 mm² | yellow | 4–6 | 12–10 AWG |
| Ferrules: DIN 46228-4 color code | |||
| 0.5 mm² | white | 0.5 | 20 AWG |
| 0.75 mm² | grey | 0.75 | 18 AWG |
| 1 mm² | red | 1 | 18 AWG |
| 1.5 mm² | black | 1.5 | 16 AWG |
| 2.5 mm² | blue | 2.5 | 14 AWG |
| 4 mm² | grey | 4 | 12 AWG |
| 6 mm² | yellow | 6 | 10 AWG |
| 10 mm² | red | 10 | 8 AWG |
| 16 mm² | blue | 16 | 6 AWG |
| 25 mm² | yellow | 25 | 4 AWG |
| 35 mm² | red | 35 | 2 AWG |
| 50 mm² | blue | 50 | 1 AWG |
| Ferrules: French color code | |||
| 0.5 mm² | white | 0.5 | 20 AWG |
| 0.75 mm² | blue | 0.75 | 18 AWG |
| 1 mm² | red | 1 | 18 AWG |
| 1.5 mm² | black | 1.5 | 16 AWG |
| 2.5 mm² | grey | 2.5 | 14 AWG |
| 4 mm² | orange | 4 | 12 AWG |
| 6 mm² | green | 6 | 10 AWG |
| 10 mm² | brown | 10 | 8 AWG |
| 16 mm² | ivory | 16 | 6 AWG |
No exact match. The nearest sizes:
How to pick the right terminal or ferrule
For insulated terminals (ring, fork/spade, butt splice, quick disconnect), the sleeve color gives the wire range and the tool die: red, blue and yellow ratchet crimpers have matching colored dies. The ranges overlap at 16 AWG / 1.5 mm². Either red or blue works there; choose by the terminal's printed range.
The stud size (ring or fork opening) is a separate number: #6, #8, #10, 1/4", 5/16", 3/8" in the US, M3.5, M4, M5, M6, M8, M10 in metric catalogues. Order by both: e.g. "blue ring, #10 stud" or "yellow ring M6".
Ferrules are sized by wire cross-section (and sleeve length). The color only helps if you know the code: DIN 46228-4 (Germany, much of Europe and most US panel shops) repeats grey, red, blue, yellow; the French code (NF C 63-023) uses a different sequence. Check the box or the catalogue, especially for grey and blue.
About Crimp Terminal Colors
The table lists the three insulated terminal colors with their wire ranges, then ferrule colors for each nominal size in the DIN and French codes, with the nearest AWG. The terminal bands are the same across the big brands (TE PIDG, 3M, Panduit, Molex) except that red is printed 22–16 AWG by some and 22–18 AWG by others; exact mm² limits differ slightly by maker. Heavy lugs continue the same color cycle: red 8, blue 6, yellow 4 AWG and so on. Below 0.5 mm² and above 50 mm² ferrule colors are less consistent and not listed.
Uninsulated terminals and heat-shrink terminals use the same red/blue/yellow bands. Heat-shrink butt splices with adhesive add a seal against moisture, common in automotive and marine work.
Ferrules are required or strongly recommended for fine-stranded (class 5/6) wire in screw terminals: they keep strands from splaying and being cut. Many spring-clamp terminals accept flexible wire without ferrules; check the terminal data. Twin ferrules take two wires of the same size in one terminal.
Crimp with the right tool: a ratchet crimper with dies for insulated terminals, a square or trapezoid crimp tool for ferrules. Pliers-style "crimpers" produce joints that pull out or overheat. A good crimp passes a pull test at the values in UL 486A or IEC 61238 / EN 60352-2.
Ring and fork terminal stud sizes
Inch stud sizes and the metric screw they fit (clearance, not exact equivalents).
| Stud | Screw diameter | Metric equivalent |
|---|---|---|
| #4 | 0.112 in (2.84 mm) | M2.5 – M3 |
| #6 | 0.138 in (3.51 mm) | M3.5 |
| #8 | 0.164 in (4.17 mm) | M4 |
| #10 | 0.190 in (4.83 mm) | M5 |
| 1/4" | 0.250 in (6.35 mm) | M6 |
| 5/16" | 0.313 in (7.94 mm) | M8 |
| 3/8" | 0.375 in (9.53 mm) | M10 |
| 1/2" | 0.500 in (12.7 mm) | M12 |
Questions
What size wire is a red crimp terminal for?
22 to 18 AWG (TE and 3M rate it 22–16 AWG), about 0.5 to 1.5 mm². Blue is 16 to 14 AWG (1.5–2.5 mm²) and yellow 12 to 10 AWG (4–6 mm²).
What size is a blue ferrule?
In the DIN 46228-4 code, blue is 2.5 mm² (14 AWG), and again 16 mm² and 50 mm². In the French code blue is 0.75 mm². Check which code the ferrules follow.
What color ferrule for 1.5 mm² wire?
Black in both the DIN 46228-4 and the French color codes. 1 mm² is red in both; 0.75 mm² is grey (DIN) or blue (French).
Can I use a red terminal on 14 AWG wire?
No. Red is rated up to 18 AWG on most brands (16 AWG on some). 14 AWG needs blue; 12 and 10 AWG need yellow. An undersized terminal will not crimp fully or will crack the barrel.
What does the stud size on a ring terminal mean?
The screw or stud the ring fits over: #8 ≈ M4, #10 ≈ M5, 1/4" ≈ M6, 5/16" ≈ M8, 3/8" ≈ M10. Wire range (color) and stud size are chosen independently.
Sources
- TE Connectivity: PIDG / PLASTI-GRIP insulated terminals, wire range colour code (red 22–16, blue 16–14, yellow 12–10 AWG)
- Panduit: Insulated terminals and splices catalogue (colour-coded wire ranges)
- DIN 46228-4: Wire end ferrules, tube form with plastic sleeve (colour code)
- NF C 63-023: French wire-end ferrule colour code
- Phoenix Contact: Ferrules AI series, colour codes DIN 46228-4 and French code
- Weidmüller: Wire-end ferrules H series, colour coding tables
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.